Street Light Photocontrol Sensor Switch Auto on-off Receptacle Photocell

Product Description

Lealite photocontroller series are applicable   to  control  the  street  lighting, garden lighting passage
lighting and  doorway lighting automatically in  accordance  with   the  ambient   natural lighting level.
They are designed  with   electronic   circuits  with   sensor  of  phototransistor and  a  surge arrester (MOV).
Its  quicker  response  with   time   delay  of  10-30  seconds  offers easy-to-test   feature.   Especially   
model  JL-205C provides   a  wide   voltage   range  for  customer applications under almost power  supplies.
Further  preset 5-30 seconds time-delay can avoid mis-operation due to spotlight or lightning during the night
time. Twist  lock terminals  meet  the  requirements of ANSI C136.1O-1996 and Standard for Plug-In Locking
Type Photocontrols for Use with  Area Lighting UL7734

Easy-to-maintain Twist-lock (ANSI C136.10)
- IP65 protection while installed
- Easy-to-test Instant switching-over
- Multi-volts available
- Surge Arrester built-in
- UL & C-UL listed.

- SPST-NO
- Electromagnetic AC relay switching
- UV stabilized Polycarbonate cover & clear window
- High impact Polybutylene terephthalate Base
- 1" CdS photocell for standard; 1/2" CdS photocell with heat sink available
- 110J/3500A MOV for standard; 235J & 460J MOV available

On-Off Levels: 6Lx On(Dusk); 50Lx Off(Dawn);

While 220V: 3Lx On, 30Lx Off(JL-201C)
Ambient Temp.: -40ºC ~ +70ºC
Related Humidity: 96%
Power consumption: 1.5VA Max.
Electrical Life: 5000 cycles

 

Lealite products are made for both industrial use and consumer purpose.
All the products include at least eight series, wire-in,twist-lock, screw-in,NEMA socket,plug-in, twist-lock receptacle, mini-twist,ZHAGA series.
 The light controller of the wiring type can be directly connected and installed according to the correct connection method in the upper right figure.
The lock controller should be equipped with a lock light control block, and the lock light control block should be installed in accordance with the right way before the right to connect the connection.
The electrical connection of the light control unit should be performed with the power supply disconnected.
When installing the spin-lock optical controller, simply insert the large pin into the large jack of the spinlock light control block and rotate it clockwise about 15 degrees to stop. Remove, the first counter-clockwise rotation of about 15 degrees to the bit, pull up to remove.
The outdoor lighting with a lock light control seat, if not to use the light control mode, you can use spin-locking short-circuit cap instead of light control, then the lamp can be controlled by ordinary switch; if temporarily use lamps, you can use spinlock Open cap instead.
outdoor light with a wired optical controller, if the temporary use of light-controlled way on duty, you can use the appropriate way to cover their photographic eyes, this time by the general lighting control switch.
 

Model	JL-205A	JL-205B	JL-205C	JL-205-12D	JL-205-24D	JL-207-48D
Rated Voltage	110-120 VAC	220-240 VAC	110-277 VAC	12 VDC	24 VDC	48DC
Applicable voltage range	100-140 VAC	200-260 VAC	105-305VAC	-	-	-
Rated Frequency	50/60Hz
Overall Dimensions(mm)	84(Dia)*66
Rated Loading	1000W Tungsten, 1800W Ballast			75W Tungsten 75VA Ballast 2A e-Ballast	150WTungsten 150VA Ballast 2A e-Ballast	150W Tungsten 150W Ballast 2A E-Ballast
Power Consumption	1.5VA[STD]/3VA[HP]
On-Off Level	10-20Lx On 30-60Lx Off					10-20Lx On 20-40Lx Off
Time-delay	3-20s
IP Rating	Optional IP54,IP65,IP67
Housing Color	according to your requirement to design product style.
Housing Feature	Optional Customized heat dissipation double cover
Certificate	CE,RoHS,UL,RoHS other validate certificate